Polycom C16 Uživatelský manuál stáhnout pdf (Strana 116)

100

101

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

5 - 36

input signals.

SoundStructure devices include the following styles of look-ahead dynamics

processing.

• Peak Limiter

• Limiter

• Compressor

• Expander

• Gate

The SoundStructure Studio user interface for adjusting the dynamics settings

are shown in the following figure.

The dynamics processing can be turned on or off for a channel by toggling the

enable button on either the channels page or on the dynamics control high-

lighted on the previous figure. As with other controls, dynamics processing

can be configured for a virtual channel or a virtual channel group. When

dynamics processing is applied to stereo virtual channels, the underlying left

and right dynamics processors will apply the same gain. Linked dynamics

processors apply gain as though the highest level input signal were applied to

both of their inputs.

The gate, expander, compressor, limiter, and peak limiter must be enabled

individually with their individual enable buttons. In the previous figure the

limiter is enabled. Once the dynamics processing is enabled, the dynamics pro-

cessing curve will update as adjustments are made to the dynamics processing

settings.

On the dynamics processing page there is also a fader control - the same fader

control found on the channels and matrix page- that can be used to add or

remove gain from the underlying virtual channel.

The Reset button may be used to return the Dynamics processing to its default

settings which leaves the signal unprocessed.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 491 492

Komentáře k této Příručce

Žádné komentáře

Polycom C16 Uživatelský manuál Strana 116

Komentáře k této Příručce