Polycom C16 Uživatelský manuál stáhnout pdf (Strana 67)

100

101

SoundStructure Design Concepts

3 - 23

IR Receiver Virtual Channel

The IR receiver input on the SoundStructure device will respond with

acknowledgments when a valid IR signal is received. The first step towards

using the IR receiver is to define the IR receiver virtual channel. This may be

done with the following syntax:

vcdef “IR input” control ir_in 1

where 1 is the only physical channel that can be specified since there is only

one physical IR receiver channel.

Once a command from the Polycom HDX IR transmitter, a command

acknowledgement of the form:

val ir_key_press “IR Input” 58

will be generated by the SoundStructure device when a key that corresponds

to code 58 is pressed on the IR remote transmitter. The infrared remote

controller ID must be set to the factory default of 3 for the IR receiver to

properly identify the command.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 491 492

Komentáře k této Příručce

Žádné komentáře

Polycom C16 Uživatelský manuál Strana 67

Komentáře k této Příručce